HOME > Product Information > Lever Type Dial Indicators

Lever Type Dial Indicators PIC TEST ; Change lever type PC series

Miniature Bearing Used   The miniature bearing used as a bearing at the pivot   of the contact point to show good indication stability   without any effect by rod play. O-ring used   Oil resistance is enhanced by seating the O-ring in   the turning section of the outer frame. Pointer motion Change lever type PC series Model PC-1A Graduation 0.01mm Range 0.5mm Contact Point No. XP1A-2 Model PC-1B Graduation 0.01mm Range 0.8mm Contact Point No. XP1B-2 Model PC-1L Graduation 0.01mm Range 1.0mm Contact Point No. XP1L-2    (L = 43.0mm) Model PC-2 Graduation 0.002mm Range 0.28mm Contact Point No. XP2-2 Change lever type PC series (Parallel) Model PC-3 Graduation 0.01mm Range 0.5mm Contact Point No. XP1A-2 Model PC-3L Graduation 0.01mm Range 1.0mm Contact Point No. XP1L-2 Model PC-4 Graduation 0.002mm Range 0.28mm Contact Point No. XP2-2 Specifications Model Graduation (mm) Range (mm) Reading Accuracy MPE (µm)   Measuring force less than (N) 10 Scale 1 Rev. Wide-range Forward accuracy Hysteresis Repeatability  PC-1A 0.01 0.5 0 - 25 - 0 5 -- 6 4 3 0.4  PC-1B 0.01 0.8 0 - 40 - 0 5 -- 9 4 3 0.4  PC-1L 0.01 1.0 0 - 50 - 0 5 -- 10 5 3 0.4  PC-2 0.002 0.28 0 - 140 - 0 2 -- 4 3 1 0.4  PC-3 0.01 0.5 0 - 25 - 0 5 -- 6 4 3 0.4  PC-3L 0.01 1.0 0 - 50 - 0 5 -- 10 5 3 0.4  PC-4 0.002 0.28 0 - 140 - 0 2 -- 4 3 1 0.4 Accessories (Option) Dimensions 型 式 L (mm) PC-1A 21.4 PC-1B 22.4 PC-1L 43.0 PC-2 12.0 Dimensions 型 式 L (mm) PC-3 21.4 PC-4 12.0 PC-3L 43.0 | HOME | Product Information | Lever Type Dial Indicators | INDEX: Model No. | | Page Top | Design and specifications are subject to change without notice for future improvement.

Copyright(C) OZAKI MFG.CO.,LTD. All Rights Reserved.