 Specifications |
| Model |
CM-5B ( Discontinued ) |
| Resolution |
0.005mm or 0.001mm select by conversion switch |
Display
capacity |
For 0.005mm, up to 5 digits (+00.000 - +999.995) with ± symbol
For 0.001mm, up to 5 digits (+0.000 - +99.999) with ± symbol |
| Response speed |
1000mm / sec at 0.005mm setting and 600mm / sec at 0.001mm setting |
Judgement
setting Display |
Lower and Upper limit setting via digital switch of 6 digits each |
| Quantizing error |
± 1 count |
Judgement
Output |
Output from relay contact point (a contact point)
(DS1-S-DC5V Matsushita or equivalent product) |
Judgement
Display |
-NG (Yellow), OK (Green) & +NG (Red) |
Operating
temperature |
0 - 40ºC |
| Power supply |
AC100V - AC240V 50/60Hz |
Weight /
Dimensions |
2.2kg / 200(W)×230(D)×70(H)mm |
| Accessories |
Judgement output connector
(PRC03-12A10-4F10.5 Tajimi brand) |
Compatible
linear gauges |
DL-2(S) / D-5(S) / D-10(S) / D-20(S)
D-50(S) / D-100(S)
D-5UZ / DN-10S / DN-20S |
Data output
(BCD OUT) |
Output by positive logic, parallel digits and open collector |
| Functions |
 User selectable resolution (0.001mm at time of shipment). |
| Equipped with failure alarms (When counting error or gauge fails,
display blinks) |
| Judgement output is constantly on (control output is possible with
an additional optional connector) |
| Setting values for judgement is included in ±NG at shipment (Changeable) |
| BCD output can be connected to, for example, a sequencer by using open
collector. |
|
| Options |
Additional pass/fail detection control connector (attachable
to the back panel).
Includes CM-5B-CONT. |
| Extemal RESET/LATCH connector is added (on back panel). CM-5B-RL. |
| Tilt stand is added (for tilting display for easy viewing). CM-5B-ST. |
|
Design and specifications are subject to change without notice for future
improvement.